Precautions before use of mineral water bottle blowing machine

Mineral water bottle blowing machine is mainly used to blow mineral water bottles. It can blow plastic particles or preforms into bottles through certain technological means, so that people can use various shapes of plastic in their lives. Bottles bring convenience. The blow molding machine is mainly operated by oil-free air bag clamping technology. Not only does it have a large clamping force, but also has less force in the toggle operation and long life. When people use the blow molding machine, they should How can the operation be more simple and convenient to use and extend the service life of the bottle blowing machine?

1. When people use the bottle blowing machine, they should carefully check whether the power supply, control system, heating system, etc. of the bottle blowing machine are in a normal state, and for the parts that need to add lubricating oil, they need to add an appropriate amount of lubricating oil to ensure To ensure the normal use and operation of the equipment.

2. When using the blow molding machine, the mold should be accurately installed on the blow molding machine, and check whether the button is in the correct position, and also need to start, debug or run according to the specified requirements, and confirm Machinery equipment is running and working under normal conditions.

Specific operation steps of automatic bottle blowing machine

1. When the bottle blowing machine is operated, the preform should be placed in the preform container first, and then the conveying device in the machine will automatically enter the automatic positioning device according to the preform, and then move the preform mouth upwards , Loaded onto the preform holder and sent to the drying tunnel.

2. After heating, the preform will be sent to the blowing and stretching platform for mold clamping. After low pressure and high pressure blowing and stretching, the gas will be removed, and finally the mold will be opened. Take off the formed bottle.